STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and hygroscopic properties with printability.
Tested for use on Creator Pro, Dreamer and Guider 2
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.
Features
- Superb mechanical properties
- Strong, flexible, high impact resistance, high crack resistance, and high scratch resistance
- Excellent chemical resistance
- Excellent weather and UV resistance
- Outstanding dimensional stability
- Good first layer adhesion to EasyPad + DimaFix prepared print bed
- Very clear in its natural form (without added colorants)
General printing guidelines:
|
Nozzle size: ≥ 0.2mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 100 - 110% |
|
Print temp: ± 240 - 270° C |
Print speed: Low / Medium |
Retraction: Yes ± 5mm (@45mm/s) |
|
Heat bed: ± 80 - 120° C |
Fan speed: 10-30% |
Experience level: Intermediate / Expert |
Return/Warranty
Exchanges will only be made if products are found to be defective as a result of manufacturing processes. All other exchanges and warranty claims will be on a case-by-case basis. Contact Meka 3D Printing Pte Ltd at contact@meka3dp.com for claims.
Cancellation Policy
Cancellations and refunds are only done on a case-by-case basis. Contact Meka 3D Printing Pte Ltd at contact@meka3dp.com for claims.
Shipping
Shipping within Singapore is free, this takes about 3-4 days. For urgent orders, you can choose next day shipping at checkout. We currently do not allow any pick ups from our office. International shipping costs can be calculated at checkout - we work with different shipping agents to provide you with the best value.
You might also like
