Formfutura EasyFil™ PLA - Glow in the Dark Green is an awesome colour changing filament. This Glow in the Dark filament has a natural milky white appearance in daylight and turns into a luminous green colour in the dark, best fit for glow in the dark printing.
The filament, or printed object, will basically “charge” its Glow with UV/daylight, resulting in an impressive luminous green colour when dark. Its Glow in the Dark effect is beyond any comparison.
Formfutura EasyFil™ PLA - Glow in the Dark is part of the EasyFil™ PLA filament range. EasyFil™ PLA is a high-end “easy to use” 3D printer filament best materials for 3d printing. EasyFil™ PLA is slightly modified with an impact modifier making the filament tougher, slightly softer, less rigid, last longer and easy to print at relatively low temperatures.
No heated bed necessary
Another great advantage of EasyFil™ PLA – compared to regular PLA – is EasyFil™’s low shrinkage factor, which makes EasyFil™ PLA nearly warp-free and therefore doesn’t deform on cooling. Due to its low tendency to warp EasyFil™ PLA can be printed without a heated print bed. If your printer is however equipped with a heated print bed we recommend to set your heat bed temperature to ± 35° to 60°C.
Next to its “easy to use” features, Formfutura EasyFil™ filament range has an excellent roundness, very tight diameter and ovality tolerances, which makes this filament a perfect match with all common desktop 3D printers. The printing process with EasyFil™ PLA 3D printer filament is very smooth, essentially with all FFF/FDM technology-based desktop 3D printers.
EasyFil™ PLA does not contain any hazardous, or chemical substances. In fact, all EasyFil™ PLA filaments are RoHS certified and REACH compliant.
Please be aware that Glow in the Dark filaments contains a relatively high concentration of extremely hard phosphorus particles, which have an abrasive nature. In general, these phosphorus particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend using nozzles from stainless steel or other hardened alloys.
1.75mm EasyFil™ Glow in the Dark Green PLA 3D printer filament is wrapped on a transparent ABS plastic spool which contains approximately 0.75Kg of the filament.
Materials will be exchanged only if products are found to be defective as a result of manufacturing processes. We supply 3d printer parts in Singapore and Worldwide.
All exchanges and warranty claims will be on a case-by-case basis. Contact Meka 3D Printing Pte Ltd at email@example.com for claims.
Cancellations and refunds are only done on a case-by-case basis. Contact Meka 3D Printing Pte Ltd at firstname.lastname@example.org for claims.