This is an all metal hotend upgrade for Flashforge Finder and Guider 2 3D Printers.
All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With an All Metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn't have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, filaments are surrounded by thermally conductive nozzle throughout its length.
- 1 Plated Brass Wear Resistant Nozzle
- 1 Thermal Tube
- 2x Jam Nuts (to aid in removing old hotend)
- FlashForge Guider 2
- FlashForge Finder
Materials will be exchanged only be products are found to be defective as a result of manufacturing processes. All other exchanges and warranty claims will be on a case-by-case basis. Contact Meka 3D Printing Pte Ltd at firstname.lastname@example.org for claims.
Cancellations and refunds are only done on a case-by-case basis. Contact Meka 3D Printing Pte Ltd at email@example.com for claims.